RENDER COLOURING TOOL

MATERIALS CALCULATOR

0113 3455170

AZ 130 Quick-setting mortar

For rapid repairs of concrete, reinforced concrete and masonry building structures. For treating small damages of mineral plasters and repairs of cement underlay and floors. Due to high strength and short setting time, the mortar is suitable for setting bolts in foundations, columns in bell footing, and for masonry works in lower temperatures (however, above 0Ā°C). Intended for interior and exterior use.

 

Package
Single: 25 kg bag

£9.60

Substrate type
Concrete and reinforced concrete components, masonry wall of bricks, ceramic and silicate blocks, as well as cellular concrete blocks. Old, not weathered cement and cement-lime plaster.

Substrate preparation
The substrate should be dry and strong enough, free from dust, dirt, fat, paint and bitumen. The substrate surface should be rough and porous. Widen existing cracks and scratches to min 5 mm, and scratch smooth substrates.

Instructions for use
Pour required portion of the mortar to a container with specified amount of cold and fresh water, and stir manually or mechanically to bring the mix to homogeneous and required consistency. Rub a thin layer of the mortar into the substrate, and then apply and spread to the required thickness. Bond subsequent portions of the mortar before the material starts setting. As the mortar sets very quickly, use it within 30 minutes from mixing with water. If the mortar thickens in that period of time, stir it again thoroughly without adding water. Adding too much water prolongs setting time and impairs all mortar characteristics, such as: adhesion and strength.

Tools
Low-speed electric mixer, mortar mixer, trowel, putty knife, steel float, container for mortar and water.

Working conditions
Work in ambient temperatures between 0Ā°C and +30Ā°C. Do not add any other agents to the mortar. Protect freshly applied mortar from excessive drying and moisture.

Storage
Store in original, unopened packages in dry place ā€“ shelf life 12 months from production date. Protect from moisture during transport and storage.

Notes
The specifications and instructions for use are given for the temperature of (20Ā±2)Ā°C and relative air humidity of (65Ā±5)%. The workability may alter in different conditions. Becomes alkaline mixing with water. Irritating to eyes and respiratory system. Appropriate eye, respiratory system and skin protection measures should be used. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep away from children. Use water to remove fresh dirt or ALPOL AI 770 cleaner to remove hardened dirt. The manufacturer accepts no responsibility for damage caused by unskilful or inappropriate use of the product.

General recommendations
Perform masonry works according to building practice, observing health & safety standards and regulations.

Specifications
Composition: blend of Portland cement, sand, mineral admixtures and additives
Bulk density approx. 1.5 kg/dmĀ³
Appropriate amount of water between 3.5 and 4 dmĀ³/25 kg
approx. 0.15 dmĀ³/kg
Workability approx. 30 min
Compressive strength ā‰„ 15 MPa
Initial shear strength* ā‰„ 0.15 MPa
Layer thickness while laying:
ā€“ with thin joint
ā€“ with conventional joint
ā€“ in case of repairing masonry components and filling in anchorage areas
> 3 mm
approx. 10 mm
no limitation
Yield approx. 14 dmĀ³ out of 25 kg
approx. 0.56 dmĀ³ out of 1 kg
Coverage for the layer 10 mm thick approx. 17 kg/mĀ²
Chloride content ā‰¤ 0.1 % Cl
Fire resistance class A1
Water absorption ā‰¤ 0.3 kg/(m2Ɨmin0,5)
Steam penetration factor, Āµ* 15/35
Resistance frost resistant

Description

For rapid repairs of concrete, reinforced concrete and masonry building structures. For treating small damages of mineral plasters and repairs of cement underlay and floors. Due to high strength and short setting time, the mortar is suitable for setting bolts in foundations, columns in bell footing, and for masonry works in lower temperatures (however, above 0Ā°C). Intended for interior and exterior use.

 

Package
Single: 25 kg bag

Additional information

Weight 25 kg
Please enable JavaScript in your browser to complete this form.