RENDER COLOURING TOOL

MATERIALS CALCULATOR

0113 3455170

AG 700 Deep penetrating strengthening primer

Category

For strengthening mineral substrates before gluing ceramic tiles with cement adhesives, laying polymer and polymer cement waterproofing, plastering, flooring, stopping and skimming, gluing thermal insulation panels in the thermal insulation systems as well as painting with acrylic, latex and vinyl paints. In addition, it reduces and even out substrate absorption. Intended for interior and exterior use.

Package

Single: 10 kg canister

£36.00

Substrate type
Concrete, cement and gypsum surfaces, cement, cement-lime, lime and gypsum plasters, cement, gypsum and polymer finish coats and fillers, gypsum boards and other gypsum elements, walls made of ceramic and silicate bricks and hollow clay blocks as well as of cellular concrete blocks.

Substrate preparation
Substrate must have an adequate bearing capacity and be dry and free from dirt, dust and greasy spots. Remove loose paint coats and plasterwork. Chipped areas and irregularities should be patched with ALPOL AZ 130 quick setting mortar or ALPOL AZ 135 levelling mortar. For new plasters, allow at least 2-week seasoning time.

Instructions for use
Before use, the primer should be stirred thoroughly and then applied evenly to the substrate in a manner appropriate to the type and condition of the surface: using a paintbrush or brush (rubbing it well into the substrate), using a paint roller or low-pressure spray (avoiding the formation of stains and spray mist). Do not thin with water. Repeat priming in case of highly absorbing substrates.

Tools
Paint brush, dash brush, roller, spraying dash brush, container.

Working conditions
Work in ambient and substrate temperatures between +5Ā°C and +30Ā°C. Do not free add other substances to the product. Protect freshly applied primer from excessive moisture and rain.

Storage
Store in original, unopened packages ā€“ shelf life 9 months from production date. Protect from freezing and overheating during transport and storage.

Notes
The specifications and instructions for use are based on the temperature of 20(Ā±2)Ā°C and relative air humidity 65(Ā±5)%. The drying time may alter in different climate. Contains: post-reaction mixture of 5-chloro-2-methyl-2H-isothiazol-3-one [EC no. 247-500-7] and 2-methyl-2H -isothiazol-3-one [EC no. 220-239-6] (3:1). May cause allergic reaction. Wear safety goggles. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Protect your skin by using protective clothing and gloves. Keep out of the reach of children. Use water for cleaning tools. The manufacturer assumes no liability for damage resulting from unskilful or improper use of the product.

General recommendations
Work according to building practice, observing health & safety standards and regulations.

Specifications
Composition: water dispersion of styrene-acrylic copolymer and preservatives
Volume density approx. 1 kg/dmĀ³
Non-volatile substance content ā‰„ 10% of the compound
Water solubility total
Coverage (for a single coat) approx. 0.15 kg/mĀ²
OC limit value according to Directive 2004/42/EC (cat. A/subcat. g) ā€“ 30 g/l.
Maximum VOC content of the ready-to-use product is
ā‰¤ 30 g/l
Appearance: white liquid, no sediment, delamination or gelation

Description

For strengthening mineral substrates before gluing ceramic tiles with cement adhesives, laying polymer and polymer cement waterproofing, plastering, flooring, stopping and skimming, gluing thermal insulation panels in the thermal insulation systems as well as painting with acrylic, latex and vinyl paints. In addition, it reduces and even out substrate absorption. Intended for interior and exterior use.

Package

Single: 10 kg canister

Additional information

Weight 10 kg
Please enable JavaScript in your browser to complete this form.